Setting the RS-232C Communication
Specifications
Set the communication specifications for the Controller matched to the communication
specifications of external devices.
FUN mode-[SYSTEM]-[RS-232C]
Setting value
LENGTH
PARITY
STOP (stop bit)
BAUDRATE
DELIMITER
Setting the Node No.
This node No. sets the connection group No. as seen from the host device (PLC). Not
only the ZG series but also two or more devices can be connected to the PLC. The No.
assigned to devices connected to a PLC in this instance is referred to as a node No.
FUN mode-[SYSTEM]-[NODE]
Setting value
0 to 16
104
System Settings
Description
8BIT, 7BIT (default value: 8 BIT)
NONE, ODD, EVEN (default value: NONE)
1BIT, 2BIT (default value: 1BIT)
9600, 19200, 38400, 57600, 115200 (default value:38400)
CR, LF, CR+LF (default: CR)
Description
This node No. sets the connection group No. as seen from the
PLC. (default value: 0)
ZG User's Manual