Floor Jack - Acura 3.5 RL Manual

Floor Jack

1. Block the rear wheels when raising the front of the
vehicle; block the front wheels when raising the rear
of the vehicle.
Place the blocks behind and ahead of the wheels.
2. Raise the vehicle high enough to insert the safety
stands.
3. Adjust and place the safety stands so the vehicle
will be approximately level, then lower the vehicle
onto them.
Front
Center the jack
bracket in the middle
of the jack lift platform.
Rear
Center the jack
bracket in the middle
of the jack lift platform.
JACK LIFT PLATFORM
JACK LIFT PLATFORM
Always use safety stands when working on or under
any vehicle that is supported by only a jack.
Never attempt to use a bumper jack for lifting or
supporting the vehicle.