Plc Interface; Program Selection - Siemens SINUMERIK 840D sl Commissioning Manual

PLC interface

11.1

Program selection

You can create a program list by combining desired programs from the NC data, e.g.
workpieces, part programs and subprograms. These programs can then be selected by the
PLC for execution.
Storage location
The program list "plc_proglist_manufacturer.ppl" is stored on the CompactFlash card at the
following path: Oem/hmi/plc/programlist
Procedure
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
1. Select the "Startup" operating area.
2. Press the menu forward key and the "Prog. list" softkey.
The "Program List" window appears.
3. Press the "Manufacturer" softkey if you want to create a program list
that can be used for all machines of a certain series.
4. Place the cursor in the desired line (program number).
5. Press the "Select program" softkey.
The "Programs" window opens. The data tree of the NC memory with
workpiece, part program and subprogram directory is displayed.
6. Place the cursor on the desired program and press the "OK" softkey.
The selected program is inserted in the first line of the list together
with its path.
- OR -
11
73