Language Kit; Language Firmware History - Gestetner B147 Service Manual

Firmware History for B147/B149/B190

3. LANGUAGE KIT:

CARD VERSION
3.28

3.1 LANGUAGE FIRMWARE HISTORY:

Initial Production Release
Using the Language Kit.
1. Insert the SD card containing the firmware into the controller SD card slot.
2. Turn ON the main power. Then, chose either the First or Second display language for the update.
Note: It is also possible to write to both the First and Second languages.
3. Start the update.
4. Select the appropriate display language in User Tools.
As shown in the table below, there are some cases where certain languages cannot be displayed, depending
on the type of operation panel software:
Possible Display Languages for Operation Panel Software
Key:
: Can be displayed.
∆: Can be displayed, but printer application window is not displayed correctly.
--: Cannot be displayed.
LCDC Software:
Language:
Japanese
English-NA
English-UK
French
German
Italian
Spanish
Dutch
Norwegian
Danish
Swedish
Portuguese
Czech
Finish
PART NUMBER CHECK SUM
B1015238
SYMPTOM CORRECTED
B1015234 B1015235
NA
5F95 October 2003 production
B1485531
EU Asia/TWN
--
PRODUCTION DATE
CARD
VERSION
3.28
Page 7 of 15