Printer; Printer Firmware History - Gestetner B147 Service Manual

Firmware History for B147/B149/B190

14. PRINTER:

CARD VERSION
1.01
1.02
1.03.1
1.04
1.05

14.1 PRINTER FIRMWARE HISTORY:

Initial Production Release
Corrects the following: GPS
•
Cell shading specified using the "pattern" settings is not printed when using Excel (for
Win2K/XP).
Corrects the following: PCL
•
The form overlay and text in a PCL job are printed separately.
•
Vector lines are shifted slightly to the side with Overlay Printing (PCL 5c 1.4.0.0).
•
Incorrect font size settings when printing a multi-page document in PCL format.
Corrects the following:
•
B/W pages contained in data sent from the driver as a Color job are not counted up by
the external counting device when the device is set to prohibit B/W prints.
NOTE: The mainframe counters increment correctly.
•
Addition:
Bit SW2 bit 6 is now active, which utilizes a new dither pattern to improve color
consistency in 600x600dpi, 2-bit Photo Mode.
NOTE: To properly activate the setting, it is necessary to turn the main power Off/On,
and then perform ACC.
Corrects the following: GPS
•
SC920 sometimes occurs when attempting to bring the Printer function on line (timeout
error).
Corrects the following: GPS
•
Sometimes Locked Print does not work when User Code Control is enabled.
PART NUMBER CHECK SUM
B6126505
B6126505A
B6126505B
B6126505C
B6126505D
SYMPTOM CORRECTED
A666 October 2003 production
EDEF December 2003 production
A415 January 2004 production
D24E February 2004 production
4423 July 2004 production
PRODUCTION DATE
CARD
VERSION
1.01
1.02
1.03.1
1.04
1.05
Page 14 of 15