Table of Contents
Related Manuals for Honda CBR1000RR2007
Summary of Contents for Honda CBR1000RR2007
- Page 1 2007 CBR1000RR REPSOL EDITION SET-UP INSTRUCTIONS Set-up and pre-delivery service must be performed by an authorized Honda motorcycle dealer. MPD 11780 (0701) ©2007 American Honda Motor Co., Inc. – All Rights Reserved Issued: February 2007...
- Page 2 To reduce the possibility of a fire or explosion, be careful when working around gasoline or batteries. Use only a nonflammable solvent, not gasoline, to clean parts. Keep all cigarettes, sparks and flames away from the battery and all fuel-related parts. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 3 Indicates the pre-delivery section Modifications and Accessories Modifications that you may have made, or should make in the future, to any Honda product, shall be deemed by our company to have been performed at your sole risk and responsibility, and without our company's or the manufacturer's approval, or consent, implied or expressed.
- Page 4 Keep the You and Your Motorcycle - Riding Tips & Practice Guide booklet separate and hand deliver to the customer at the time of delivery. STRAP PARTS CARTON ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 5 4. Riding Tips & Practice Guide G0045* 5. Owner’s Manual 31MEL630** 6. Owner’s Manual bag 77251-GR1-000 (Continued on next page.) *If missing, order from Resolve Corp. **If missing, order from Helm Inc. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 6 Claims for missing loose parts or those damaged during transit should be submitted to American Honda, not the carrier. After completing repairs, submit a Transportation Claim via iN. For complete details, please refer to the Warranty Policy and Procedures Manual.
- Page 7 SHIPPING PARTS BOLTS BRACKET Top triple clamp cap Being careful not to damage the upper cowl, remove the bolts and front shipping bracket. CAPS Install the top triple clamp caps. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 8 Torque the bolts, starting with the top one. Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft) CLUTCH LEVER ASSEMBLY BOLTS PUNCH MARK ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 9 Lower the side stand, place the motorcycle on a level surface, and remove the slings. Clean both sides of all three brake discs with Pro Honda Brake Cleaner or equivalent and a clean shop towel. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 10 Ensure that the windscreen’s middle mounting holes align with the corresponding holes in the upper cowl and the upper cowl stay. UPPER COWL WINDSCREEN UPPER COWL STAY ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 11 13. Store the tool kit and REAR SEAT Owner’s Manual. PARTS Tool kit IGNITION Owner’s Manual Owner’s Manual bag Use the ignition key to unlock and open the rear seat. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 12 Remove the protective coverings from the SIGNAL SIGNAL seats, turn signals, footpeg guard, horn, steering damper, and brake pedal. FOOTPEG GUARD STEERING HORN DAMPER TURN TURN BRAKE PEDAL SIGNAL SIGNAL ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 13 See note below NOTE: American Honda recommends hand delivering the REPSOL decal to retail customers at time of purchase. For a limited period of time, Honda Riders Club of America will send Nicky Hayden World Championship commemorative decals direct to the registered retail purchaser of 2007 CBR1000RR Repsol Edition units.
- Page 14 15. Apply Repsol Edition decal set (cont.). BREMBO BREMBO MICHELIN MICHELIN SNAP-ON SNAP-ON SHINDENGEN SHINDENGEN SHOWA DENKO SHOWA DENKO ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 15 HONDA logo and apply the MICHELIN decal. Measure 15 mm rearward of the MICHELIN decal and 82 mm above the HONDA logo and apply the RK decal. Measure 24 mm rearward of the RK decal and 25 mm above the HONDA logo and apply the NGK decal.
- Page 16 MICHELIN decal. Measure 40 mm rearward of the MICHELIN decal and 45 mm above the HONDA logo and apply the RK decal. A portion of the RK decal must be removed for correct fitment. Measure 29 mm rearward of the RK decal and 14 mm above the HONDA logo and apply the NGK decal.
- Page 17 Measure 14 mm above the REPSOL logo and apply the GAS decal. The distance between the lowest portion of the GAS decal and the top of the REPSOL logo is referenced in the photo. 14 mm FENDER CENTER ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 18 16. Verify the proper routing of the cables, hoses, and wire harnesses. CLUTCH HOSE POSITIVE (+) BATTERY TERMINAL NEGATIVE (-) BATTERY TERMINAL FRONT ©2006 American Honda Motor Co., Inc. - All Rights Reserved...
- Page 19 6 x 14 mm pan screws and torque them. COLLARS Torque: 9 N·m (0.9 kgf·m, 6.6 lbf·ft) Be careful not to damage the rear cowl with the seat tabs. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 20 RESERVOIR Reinstall the diaphragm, cap, retainer, and screw. Torque the screw. Torque: 1.2 N-m (0.12 kg·m, 0.9 lbf·ft) Operate the clutch lever. If the freeplay is excessive, bleed the system. ©2006 American Honda Motor Co., Inc. - All Rights Reserved...
- Page 21 Do not use tap water as it could cause engine damage. Do not spill coolant on any painted or plastic surfaces, as it may damage the finish. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 22 Verify the engine idle speed. If adjustment is required, use only the throttle stop screw. Idle speed: 1,200 ± 100 rpm THROTTLE STOP SCREW Stop the engine and remove the tachometer. ©2006 American Honda Motor Co., Inc. - All Rights Reserved...
- Page 23 RUN position, and press the starter button. If the engine starts, there is a problem with the clutch lever ignition cut-off switch. Troubleshoot the cause. ©2007 American Honda Motor Co., Inc. – All Rights Reserved...
- Page 24 Rear: 42 psi 27. Complete the Set-up/Pre-delivery form. Complete an On-Road Motorcycle Set-up/Pre- delivery Checklist (Reorder No. S0299.2, also available on iN) by checking the boxes confirming the steps were done. ©2006 American Honda Motor Co., Inc. - All Rights Reserved...
- Page 25 2007 CBR1000RR REPSOL EDITION WIRING DIAGRAM 0030Z-MEL-A200 (A) 0030Z-MEL-L200 (AC) ©2007 American Honda Motor Co., Inc. – All Rights Reserved...