Copying Procedure; Step 1 Loading Documents - Fuji Xerox DocuCentre-II 2055 User Manual

3 Copy

Copying Procedure

This section describes the basic copy procedures. The following shows the reference
section for each procedure.

Step 1 Loading Documents .........................................................................................................50

Step 2 Selecting Features ............................................................................................................52
Step 3 Entering the Quantity.......................................................................................................53
Step 4 Starting the Copy Job.......................................................................................................53
Step 5 Confirming the Copy Job in the Job Status .....................................................................54
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
Single sheet
Multiple sheets
3
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from
139.7 x 210 mm (A5, 5.5 x 8.5 inches) to 297 x 432 mm (A3, 11 x 17 inches).
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
For information on entering document sizes, refer to "Original Size (Specifying the Scan Size for the
Document)" (P.68).
Note
The document feeder accepts the following number of sheets.
Lightweight paper (38 - 49 g/m
Plain paper (50 - 80 g/m
Heavyweight paper (81 - 128 g/m
For information about copying mixed sized documents, refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)" (P.69).
Important • Place folded or creased documents on the document glass to avoid paper jams.
50
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information about paper size settings, refer
to "Paper Size Settings" (P.285).
Document Type (Weight)
2
2
)
• Two sided scanning of lightweight paper 38 - 49 g/m
Number of
Sheets
) 75 sheets
75 sheets
2
) 50 sheets
2
is not supported.