Solving Curled Output For The Finisher D2-P With Booklet Maker - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

15 Problem Solving

Solving Curled Output for the Finisher D2-P with Booklet Maker

You can correct the curling of the output by pressing the De-curl button.
The De-curl button functions both in suspension and in operation if the power of the
machine is on.
Note
1
Check how the output copy is curled.
2
Check that the De-curl button lights up.
Note
3
Press the De-curl button.
Note
For more information, refer to "Mode and function of the De-curl button" (P.637).
15
636
• To change the curling correction mode while the machine is in operation, press the De-curl button
and then the change will be applied immediately.
• Pressing the Reset button on the control panel cannot change the curling correction mode.
• When the machine is turned on, the de-curl
mode is set to Auto.
• When you cancel the Power Saver mode, the
de-curl mode will be set to Auto.
• Pressing the De-curl button toggles the mode between Auto, ON, and OFF.