Mixed Size Originals (Scanning Different Size Documents Simultaneously) - Fuji Xerox DocuCentre-IV 3065 User Manual

3 Copy

Mixed Size Originals (Scanning Different Size Documents Simultaneously)

You can scan documents of various sizes simultaneously and make copies on each
size or a single size of paper. To use this feature, load the documents in the document
feeder.
Important • Load documents in landscape orientation. However, always load A5 documents in portrait
Note
1
Select [Mixed Size Originals].
3
2
Select [On].
Off
Select this option when copying documents
of the same size.
On
When documents of different sizes are copied, the machine automatically detects the
size of each document.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
96
orientation.
• When loading B5 documents together with A3 documents loaded in landscape orientation or
A4 documents loaded in portrait orientation, load B5 documents in portrait orientation.
• If the top left corners of the documents are not aligned properly, the documents may not be
scanned correctly.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
portrait and B4 landscape. If another combination of document sizes is used, the documents
can be fed at an angle and may not be copied properly.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• The [Original Orientation] setting is based on the orientation of the first page of a document.
Load the second and subsequent pages of the document based on this setting.
• If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.