Mixed Sized Originals (Scanning Different Size Documents Simultaneously) - Fuji Xerox DocuCentre-II 2055 User Manual

1
Select [Original Size].
2
Select the size of the document.
If you select a non-standard size,
specify values for the X and Y
directions.
Auto Size Detect
Detects the document size automatically.
Note • If the document size cannot be detected automatically, a screen to input the document size
Standard Size
Select a document size from 11 pre-configured types.
You can change the indicated document sizes. For information on the settings, refer to "Original Size
Defaults" (P.298).
Variable Size
Enter the desired scan size when scanning non-standard size documents or when
making copies at a size different from that of the currently loaded document. Set the
size in the document glass X (width) direction within the range 15 to 432 mm and in the
Y (height) direction within the range 15 to 297 mm in 1 mm increments. The scale on
the outside of the document glass is a useful reference for specifying the document
size.
Important • When the document is loaded on the document feeder, the base point in the Y (height)
Mixed Sized Originals (Scanning Different Size Documents
Simultaneously)
When using the document feeder, you can simultaneously scan different size
documents and make copies onto paper that matches the respective sizes of the
documents. You can also specify the size of the paper to make copies on so that copies
are made on the same size of paper.
Important • Ensure that the orientation of the first sheet of the document and the [Original Orientation]
• Always load A5 documents in portrait orientation.
• When you load B5 documents together with A3 or A4 documents and the A3 or A4
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
Note • This feature does not appear for some models. An optional package is necessary. For more
• The [Original Orientation] setting is based on the orientation of the first page of a document.
1
Select [Mixed Sized Originals].
2
Select [On].
appears.
direction is the center of the edge. If you specify 100 mm, the scan size becomes from 50
mm above to 50 mm below the center of the document.
setting of the [Layout Adjustment] screen are the same.
documents are placed in portrait orientation, place also the B5 documents in portrait
orientation.
portrait and B4 landscape. If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle and may not be copied properly.
information, contact our Customer Support Center.
Load the second and subsequent pages of the document by considering this setting.
Layout Adjustment
3
69