Mapping The Radio Profile To Service Profiles - Nortel 2300 Series Configuration Manual

Wlan security switch

Hide thumbs Also See for 2300 Series:

Table of Contents

276 Configuring AP access points

Mapping the Radio Profile to Service Profiles

To assign SSIDs to radios, you must map the service profiles for the SSIDs to the radio profile that is assigned

to the radios.

To map a radio profile to a service profile, use the following command:

set radio-profile name service-profile name

The following command maps service-profile wpa_clients to radio profile rp2:

23x0# set radio-profile rp2 service-profile wpa_clients

success: change accepted.