196 Configuring Security using web-based management
3
Deleting an SNMPv3 system user configuration
To delete an existing SNMPv3 user configuration, use the following
procedure:
Step
1
2
3
Configuring an SNMPv3 system user group membership
You can view a table of existing SNMPv3 group membership configurations
and map or delete an SNMPv3 user to a group configuration.
Mapping an SNMPv3 system user to a group
To map an SNMPv3 system user to a group, use the following procedure:
Step
1
Copyright © 2007, Nortel Networks
.
Click Submit.
The new configuration is displayed in the User Specification Table
(Table 91 "User Specification Table section items" (page
Action
From the main menu, choose Configuration > SNMPv3 > User
Specification.
The User Specification page appears ().
In the User Specification Table, click the Delete icon for the entry
you want to delete.
A message appears prompting you to confirm your request.
Do one of the following:
•
Click Yes to delete the SNMPv3 user configuration.
•
Click Cancel to return to the User Specification page without
making changes.
Action
From the main menu, choose Configuration > SNMPv3 > Group
Membership.
The Group Membership page appears.
The following figure displays the Group Membership page.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B) 02.01 Standard
4.1 19 November 2007
—End—
—End—
194)).