1483 Elan Statistics; Config Atmcard Elan-Stats; Clear Atm Elan-Stats <Vlan Id; Table 14 Config Atmcard Command Parameters And Variables - Nortel Passport Module 8672A Using Manual

Chapter 5 Managing the Passport 8672ATM Module with the CLI

Table 14 config atmcard command parameters and variables

Parameters and variables
card-reset
elan-stats
<enable|disable>
info

1483 ELAN statistics

The 1483 ELAN statistics commands allow you to collect ELAN statistics for an
ATM port. The commands are:
• config atmcard <slot_number> elan-stats < enable | disable >
• clear atm elan-stats <vlan_id>
• show atm elan-stats <vlan_id>

config atmcard elan-stats

The collection of ELAN statistics is disabled by default to avoid slowing data
forwarding performance. ELAN statistics should be disabled after collection.
Enabling or disabling the collection of ELAN statistics does not clear the ELAN
statistics counters. This allows the ELAN statistics to be reviewed after the feature
is disabled.
clear atm elan-stats <vlan id>
This command allows you to clear statistics for a particular VLAN ID.
The syntax is:
clear atm elan-stats <vlan_id>
Description
Resets the card.
Enables collection of ELAN statistics.
Displays the image filename for the module.
Using the Passport 8672ATM Module
75