Snmp Show Commands; Show Snmp Community - Nortel Versalar 15000 Reference Manual

show snmp community

SNMP Show Commands

This section describes the SNMP show commands and the command options you
can enter. It also describes the information in the tables the router displays.
show snmp community
The
communities configured on the Versalar Switch Router 15000. An SNMP
community is a logical relationship between the SNMP agent on the Versalar
Switch Router 15000 and one or more SNMP managers. The output includes
information on the managers belonging to each community known to the router.
The entry for each manager includes the following information:
SNMP Management Communities
Index
Community Name
Community Access
SNMP Manager's Information
Manager Address
Manager Name
Trap Port
140
show snmp community
command displays information about SNMP
Unique numeric value that has a one to one
correspondence with the community name.
Name of the community.
Access privileges the router grants to all members of this
community, as follows:
• Read -- All members of this community can only view
configuration and performance information about this
router.
• Read/Write -- All members of this community can both
view configuration and performance information about
this router and change the router's configuration.
Internet address of this manager.
Name of this manager.
UDP port on which this manager is listening for traps.
308689-B Rev 00