Mitel 6867i Administrator's Manual page 576

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
1. Factory default the phone.
2. Configure the HTTP or HTTPS server (specify the HTTP or HTTPS server, path, and port).
3. Restart the phone.
The first time the phone reboots, the phone is challenged by the server. The phone sends
the default username of "aastra" and the default password of "aastra" to the server.
The server sends the default profile to the phone. This profile includes the information "http
digest force login: 1". When the phone receives the profile, it displays the "Log In" key
on the IP Phone UI's idle screen.
4. Press the "Log In" key to displays the username/password screen
Note: On the 6867i, 6869i, and 6873i you use the Log In softkey to log in. On 6863i
and 6865i, you press the right arrow key to log in.
5. Enter a username in the "Username" field (up to 40 characters) and a password in the
"Password" field (up to 20 characters).
Note: :The "Username" and "Password" fields accept special characters, such
as, @, #, %, =, _, etc. You can also specify domain names in the Username field
(i.e. user@domain).
6. After entering the username and password, press Submit.
The phone attempts to authenticate with the server. If successful, the phone reboots and
loads the user configuration. If unsuccessful, the phone displays "Authentication Failed".
5-315