Mitel 6867i Administrator's Manual page 975

BLACKLIST DURATION SETTING
PARAMETER –
sip blacklist duration
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
WHITELIST PROXY SETTING
PARAMETER –
sip whitelist
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
XML KEY REDIRECTION SETTINGS (FOR REDIAL, XFER, CONF,
ICOM, VOICEMAIL)
PARAMETER –
redial script
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the length of time, in seconds, that a failed server remains
on the server blacklist. The IP phone avoids sending a SIP message
to a failed server (if another server is available) for this amount of
time.
Note: The value of "0" disables the blacklist feature.
Integer
300 (5 minutes)
0 to 9999999
sip blacklist duration: 600
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This parameter enables/disables the whitelist proxy feature, as
follows:
• Set to 0 to disable the feature.
• Set to 1 to enable the feature. When this feature is enabled, an IP
phone accepts call requests from a trusted proxy server only. The
IP phone rejects any call requests from an untrusted proxy server.
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
sip whitelist: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies a redial script for the phone to use. When this parameter is
set, pressing the Redial key GETs the specified URI from the server
to use in performing the redial action.
String
empty
Any valid URI
redial script: http://bluevelvet.ana.mitel.com/redial.php
Advanced Operational Parameters
A-277