Mitel 6867i Administrator's Manual page 439

The BLF and Speeddial transfer enhancement feature provides a simpler way of transferring
calls using the keys called BLF/Xfer and Speeddial/Xfer. The BLF/Xfer key combines the BLF
and Xfer key's functionality together allowing the user to transfer calls or use BLF with one key.
Similarly, the Speeddial/Xfer key combines the Speeddial key and Xfer key's functionality
together allowing the user to press one key to speeddial and transfer calls.
Note: It is recommended that you enable the "switch focus to ringing" parameter when
using the BLF and Speeddial Transfer key feature. For more information about this
parameter, see "Switch Focus to Ringing Line"
BLF/XFER KEY REQUIREMENTS AND FUNCTIONALITY
•
BLF/Xfer and BLF
A BLF/Xfer key can be configured for subscribing to an extension and monitor the status
of the extension, similar to the BLF key functionality. Changes of the state of the monitored
extension are indicated by a LED / Icon.
•
BLF/Xfer and Blind Transfer Calls
When the focused line is in the "Connected" state, pressing the BLF/Xfer key transfers the
call to the extension unconditionally, disregarding the status of the monitored extension.
If transferring a call to an extension fails, a message "Transfer Failed" displays on the phone,
and you can reconnect the call (get the call back) by pressing the line key again.
•
BLF/Xfer and Call forward
When the focused line is in the "Ringing" state, pressing the BLF/Xfer key forwards the call
to the extension unconditionally, disregarding the status of the monitored extension.
•
BLF/Xfer and Speeddial
When the focused line and the monitored extension are idle, pressing the BLF/Xfer key
causes the phone to go offhook and dial the number of the extension.
SPEEDDIAL/XFER KEY REQUIREMENTS AND FUNCTIONALITY
The Speeddial/Xfer key has the following capabilities:
•
Speeddial/Xfer and Speeddial
When the phone is in the "Idle" state, pressing the Speeddial/Xfer key causes the phone
to go offhook and dial the predefined extension.
•
Speeddial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the
call to the predefined target.
If transferring a call fails, a message "Transfer Failed" displays, and you can reconnect the
call (get the call back) by pressing the line key again.
•
Speeddial/Xfer and Call Forward
When the phone is in the "Ringing" state, pressing the Speeddial/Xfer key forwards the
call to the predefined extension.
Operational Features
on page 5-83.
5-178