Mitel 6867i Administrator's Manual page 815

PARAMETER –
sip amr codec payload format
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip amr codec mode set
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg <mac>.cfg
Specifies the payload format for the AMR/AMR-WB codec.
Integer
0
0-2
0 (Enable bandwidth efficient mode per RFC, no octet-aligned
header is in the INVITE SDP [default]).
1 (Enable octet-aligned mode and add octet-align:1 in SDP,
negotiate mode for incoming calls).
2 (Disable octet-aligned mode and add octet-align:0 in SDP,
negotiate mode for incoming calls).
sip amr codec payload format: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg <mac>.cfg
Specifies the list of mode sets supported and also the preferred
mode to use if multiple modes are supported by both sides.
Integer
0
0-7
0 (4.75 kbps)
1 (5.15 kbps)
2 (5.90 kbps)
3 (6.70 kbps)
4 (7.40 kbps)
5 (7.95 kbps)
6 (10.2 kbps)
7 (12.2 kbps)
sip amr codec mode set: 2,1,0,3,4
A-117