Mitel 6867i Administrator's Manual page 385

Additionally, the "ringtone webui lock" parameter can be used to restrict Web UI custom ring
tone installation functionality in the User Web UI (by defining the parameter as "1") or restrict
functionality in both the User and Administrator Web UIs (by defining the parameter as "2").
Note: The "ringtone webui lock" parameter is disabled (i.e. the Custom Ringtone menu
is available in both User and Administrator Web UIs) by default.
CONFIGURING THE CUSTOM RING TONE FEATURE
Use the following procedures to configure the custom ring tone feature
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Custom Ring Tone Settings"
INSTALLING A CUSTOM RING TONE USING THE MITEL WEB UI
Use the following procedure to install custom ring tones using the Mitel Web UI
MITEL WEB UI
1. Click on Basic Settings->Custom Ringtones.
2. Press the Browse... button corresponding to the desired ring tone position (e.g. 1).
3. Navigate to the folder containing the WAV file you want to upload, select the file using your
left mouse button, and press the Open button.
The filename should now be displayed to the right of the respective Browse... button.
4. Press the Upload button to upload the file to the phone.
5. Repeat Steps 2 to 4 to upload additional WAV files to the phone.
Note: Press the Delete button to delete the desired ring tone from your phone.
on .
page A-174
Operational Features
5-124