Mitel 6867i Administrator's Manual page 365

Note: To configure incoming intercom calls using these parameters, see
Intercom Calls Settings"
CONFIGURING INTERCOM CALLS SETTINGS
You can configure the Intercom feature using the configuration files or the Mitel Web UI.
Note: An administrator can configure the incoming and outgoing Intercom feature. A
user can configure the incoming Intercom feature only.
Use the following procedures to configure Intercom calls on the IP phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files for outgoing Intercom, see
Appendix A, the section,
For specific parameters you can set in the configuration files for incoming Intercom, see
Appendix A, the section,
MITEL WEB UI
Outgoing intercom Settings
1. Click on Basic Settings->Preferences->Outgoing Intercom Settings.
2. Select an Intercom type for outgoing Intercom calls from the Type list box.
Valid values are Phone-Side, Server-Side, Off. Default is Off.
3. If Server-Side is selected, enter a prefix to add to the phone number in the "Prefix Code"
field.
Note: For Sylantro servers, enter *96.
on page 5-104.
"Outgoing Intercom Settings"
"Incoming Intercom Settings"
Operational Features
on .
page A-204
on .
page A-205
"Configuring
5-104