Voicemail Settings - Mitel 6867i Administrator's Manual

VOICEMAIL SETTINGS

PARAMETER –
sip lineN vmail
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip vmail
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Use this parameter in the <mac>.cfg file to configure the phone to
dial a specific number to access an existing voicemail account on a
Service Provider's server. The user then follows the voicemail
instructions for listening to voicemails.
Note: The phone must have a registered voicemail account from a
server for this feature to be enabled. When no registered voicemail
accounts are registered to the phone, the display shows "List Empty".
The phone displays up to 99 voicemails for an account even if the
number of voicemails exceeds the limit.
Registered account numbers/URIs that exceed the length of the
screen, either with or without the voicemail icon and the message
count, are truncated with an ellipse character at the end of the
number/URI string.
String
N/A
0-99
sip line1 vmail: *97
Note: In the above example, the user would dial *97 to access the
voicemail account.
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the phone number of the voicemail system connected to
the sip account. This parameter specifies the phone number you dial
from your phone to retrieve your voicemail.
Configuring this parameter allows you to call the voicemail system
directly from the "voicemail" application via the IP Phone UI under
the "Services" menu of the IP Phone.
Integer
N/A
N/A
sip vmail: 5553435
A-125