Mitel 6867i Administrator's Manual page 681

REBOOT CODE
OPTION::RESET (6867i, 6869i, and 6873i)
or
ResetConfigAction::performAction (6863i and
6865i)
OPTION::FACTORYDEFAULT (6867i, 6869i,
and 6873i)
or
FactoryDefaultAction::performAction (6863i and
6865i)
PraxisOptionsQuestionScreen::Restart (6867i,
6869i, and 6873i)
or
TUI::mreset (6863i and 6865i)
XMLCommand: Reset
XMLCommand: FastReboot
XMLCommand: ClearLocal
PHONEAPP::DHCP_NEW
RCS::UpdateFirmware
FirmwardUpgradePage::SetPage
DESCRIPTION
Reboot prompted by erasing the local settings of
the phone through the Options menu of the
phone's native UI.
Reboot prompted by a factory default of the phone
through the Options menu of the phone's native
UI.
Reboot prompted by the manual restarting of the
phone through the Options menu of the phone's
native UI.
Reboot prompted by the processing of a Reset
XML command.
Reboot prompted by the processing of a
FastReboot XML command.
Reboot prompted by the processing of a
ClearLocal XML command.
Reboot prompted by the IP address of the phone
dynamically changing via DHCP.
Note: In this scenario, reboot information is not
logged in the syslog, but is displayed on the Error
Messages section of the Troubleshooting menu of
the phone's Web UI.
Reboot prompted by a firmware update initiated by
the Redirection and Configuration Service (RCS).
Note: In this scenario, reboot information is not
logged in the syslog, but is displayed on the Error
Messages section of the Troubleshooting menu of
the phone's Web UI.
Reboot prompted by manually updating the
firmware through the Advanced Settings >
Firmware Update menu of the Web UI.
Troubleshooting
9-13