Mitel 6867i Administrator's Manual page 394

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
4. Enable the "Play a Ring Splash" feature by selecting either Enabled (when idle) or Enabled
also in call (when idle and in an active call state. (Default is disabled).
5. If the "Play a Ring Splash" parameter is enabled, the IP phone plays a short "ring splash"
when there is an incoming call on the BLF monitored extension.
6. Click Save Settings to save your changes.
CONFIGURING BLF OR BLF/LIST FOR DIRECTED CALL PICKUP
Use the following procedure to configure BLF or BLF/List for Directed Call Pickup in the
configuration files.
Note: You must enable Directed Call Pickup before performing these procedures. See
"Enabling/Disabling Directed Call Pickup"
CONFIGURATION FILES
To set BLF or BLF/List in the configuration files for Directed Call Pickup, see Appendix A, the
sections:
•
"Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters"
.
page A-217
•
"BLF List URI Settings"
Use the following procedure to configure BLF or BLF/List for Directed Call Pickup in the Mitel
Web UI.
MITEL WEB UI
1. Click on Basic Settings->Preferences->Directed Call Pickup Settings.
2. Enable the "Directed Call Pickup" field by checking the check box.
3. (optional) Enter a prefix in the "Directed Call Pickup Prefix" field. For example, *98.
This prefix is appended to the beginning of the Directed Call Pickup number when dialed
from the BLF or BLF/List softkey.
4. Enable the "Play a Ring Splash" feature by selecting either Enabled (when idle) or Enabled
also in call (when idle and in an active call state. (Default is disabled).
If the "Play a Ring Splash" parameter is enabled, the IP phone plays a short "ring splash"
when there is an incoming call on the BLF monitored extension.
5-133
on .
page A-256
on page 5-132
on