Mitel 6867i Administrator's Manual page 640

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
The following parameters are examples you can use to configure the Filter softkey on the
Executive's phone:
For Bottom Softkeys
softkey1 type: filter
softkey1 label: Filter
softkey1 value: "#61;*61"
softkey1 line: 1
For Top Softkeys
topsoftkey1 type: filter
topsoftkey1 label: Filter
topsoftkey1 value: "#61;*61"
topsoftkey1 line: 1
For Programmable Keys
prgkey1 type: filter
prgkey1 value: "#61;*61"
prgkey1 line: 1
For Expansion Module Softkeys
expmod1 key1 type: filter
expmod1 key1 label: Filter
expmod1 key1 value: "#61;*61"
expmod1 key1 line: 1
Filter Softkey for the Assistant's Phone
As an Assistant can be associated with multiple Executives simultaneously, the Assistant's
phone can be configured with multiple Filter softkeys; one softkey for each Executive. In this
case, the value of each Filter softkey should correspond to the phone number or extension of
the respective Executive as per configured in the user's profile.
When Filter softkeys are configured with key values, pressing the respective Filter softkey will
activate Executive Call Filtering for the applicable Executive and the softkey's corresponding
LED will be lit. When the same Filter softkey is pressed again, Executive Call Filtering for the
applicable Executive will deactivate and the softkey's corresponding LED will turn off.
Alternatively, a single Filter softkey can be configured without a defined key value. If this is the
case, the Assistant will be able to manually activate and deactivate Executive Call Filtering for
each associated Executive through the phone's UI. In this scenario, as only one Filter softkey
is utilized, the softkey's corresponding LED will be lit when Executive Call Filtering is activated
for even one associated Executive. If Executive Call Filtering is disabled for all associated
Executives, the softkey's corresponding LED will turn off.
Note: If Call Forward is enabled for filtered calls, LEDs for all Filter softkeys will be turned
off.
Configuring the Filter Softkey on the Assistant's Phone Using the Mitel Web UI
Use the following procedure to configure the Filter Softkey on the Assistant's phone using the
Mitel Web UI:
6-62