Mitel 6867i Administrator's Manual page 604

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
For the 6867i/6869i:
IP PHONE UI
1. Press
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
4. Select Network > 802.1x.
5. In the Basic Settings > EAP Type select one of the following:
• Disable (Default)
• EAP-MD5 (phone uses MD5 authentication)
• EAP-TLS (phone uses TLS authentication)
Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS
authentication, you must use the configuration files or the Mitel Web UI to configure
the certificates and private key for the phone.
6. In the EAP-TLS Settings > Identity field, enter a username used for authenticating the
phone.
7. In the EAP-TLS Settings > MD5 Password field, enter the password used for authenti-
cating the phone.
Note: You must restart the phone for the 802.1x authentication parameters to take
affect.
8. Press the Save softkey.
9. Restart the phone for the selection to take affect.
6-26
to enter the Options List.