Mitel 6867i Administrator's Manual page 132

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER
IN
IP PHONE UI
N/A
N/A
Autodial Settings
You can configure the following Autodial settings.
PARAMETER
IN
IP PHONE UI
N/A
3-62
PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
Packetization "sip customized
Interval codec" attribute
Silence sip silence
Suppression suppression
PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
Autodial Number sip autodial number
(Global and sip lineN autodial
Per-Line) number
DESCRIPTION
Packetization interval (ptime) is a
measurement of the duration of PCM data
within each RTP packet sent to the
destination, and hence defines how much
network bandwidth is used for transfer of
the RTP stream. Enter the ptime values for
the customized Codec list in milliseconds.
For more information, see Chapter 4,
"Real-time Transport Protocol (RTP)
Settings" on page 4-83.
Silence suppression is enabled by default
on the IP phones. The phone negotiates
whether or not to use silence suppression.
Disabling this feature forces the phone to
ignore any negotiated value.
For more information, see Chapter 4,
"Real-time Transport Protocol (RTP)
Settings" on page 4-83.
DESCRIPTION
Globally or on a per-line basis, specifies the
SIP phone number that the IP phone
autodials when the handset is lifted from
the phone cradle. An empty (blank) value
disables autodial on the phone.
For more information, see Chapter 4,
"Autodial Settings" on page 4-96.