Mitel 6867i Administrator's Manual page 782

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
SIP PER-LINE CALL WAITING SETTING
PARAMETER –
sip lineN call waiting
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-84
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to enable or disable Call Waiting on the IP phone on a per
line basis.
If you enable call waiting (default), the user has the option of
accepting a second call while currently on the first call. If you disable
call waiting, and a user is currently on a call, a second incoming call
is automatically rejected by the phone with a busy message.
If you disable call waiting on the phone, and the user is on a call, any
further incoming calls will receive busy unless "Call Forward Busy"
or "Call Forward No Answer and Busy" is configured on the phone.
It will then forward the call according to the rule configured. The
phone can only:
• transfer the currently active call
or
• accept transferred calls if there is no active calls.
If call waiting is disabled:
• intercom calls are treated as regular incoming calls and are
rejected.
• pre-dialing with live dial pad disabled still accepts incoming calls.
• the Missed Calls List does not get updated with details of calls.
• the Blind Transfer feature on the phone may not work if two calls
are made to the phone at one time.
Boolean
Global
Global
0 (disabled)
1 (enabled)
sip line1 call waiting: 0
sip line2 call waiting: 1
sip line3 call waiting: 0