Mitel 6867i Administrator's Manual page 539

ATTRIBUTE/OPTION
LockIn
CancelAction
ENABLING/DISABLING A BEEP FOR STATUS MESSAGE DISPLAYS
You can enable or disable a BEEP option using the Status Message object
(AastraIPPhoneStatus), the configuration files, or the Mitel Web UI.
Note: For enabling/disabling a status message beep using the Status Message object,
see the XML Developer's Guide.
When the phone receives a status message, the BEEP notifies the user that the message is
displaying.
You can use the following to enable/disable a status message beep:
• AastraIPPhoneStatus object (via XML object; see the XML Developer's Guide)
• xml beep notification (via configuration files)
• XML Beep Support (via the Mitel Web UI)
Enabling the beep is an indication to the phone to sound a beep when it receives an
AastraIPPhoneStatus object. If you disable the beep, or no AastraIPPhoneStatus object
appears in the status message, then the default behavior is no beep is heard when the object
arrives to the phone.
The value set in the configuration files and Mitel Web UI override the attribute you specify for
the AastraIPPhoneStatus object.
For example, if the AastraIPPhoneStatus object has the attribute of Beep="yes", and you
uncheck (disable) the "XML Beep Support" in the Mitel Web UI, the phone does not beep when
it receives an AastraIPPhoneStatus object.
Setting the BEEP option in the configuration files and the Mitel Web UI applies to the phone
immediately.
DESCRIPTION/USAGE
Specifies whether or not the
information on the LCD screen stays
displayed when other events occur
(such as pressing buttons on the
keypad).
Use with:
XML object (See the XML
Developer's Guide)
Specifies a URI that the phone
executes a GET on when the user
presses the default CANCEL key.
Use with:
XML object (See the XML
Developer's Guide)
Operational Features
VALID VALUES
yes | no
Default = no
Fully qualified URI
For example:
cancelAction=
http://10.50.10.117/ft.xml
5-278