Mitel 6867i Administrator's Manual page 866

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
action uri connected
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
action uri disconnected
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-168
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the URI that the phone executes a GET on, when
connected
.
This parameter uses the following variables to determine the state of
the line:
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$INCOMINGNAME$
$$PROXYURL$$
$$LINESTATE$$
$$CALLDIRECTION$$
$$LOCALIP$$
$$DISPLAYNAME$$
$$CALLDURATION$$
$$REGISTRATIONSTATE$$
$$REGISTRATIONCODE$$
String
N/A
Any valid URI
action uri connected:
http://fargo.ana.mitel.com/connected.xml?state=$$LINESTATE$$
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the URI that the phone executes a GET on, when it
transitions from the incoming, outgoing, calling, or connected state
into the idle state.
This parameter uses the following variables to determine the state of
the line:
$$LINESTATE$$
$$LOCALIP$$
String
N/A
Any valid URI
action uri disconnected:
http://fargo.ana.mitel.com/disconnected.xml?state=$$LINESTATE$
$
a call is