Preferred Line And Preferred Line Timeout - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
call hold reminder frequency
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

PREFERRED LINE AND PREFERRED LINE TIMEOUT

PARAMETER –
preferred line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-178
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the time interval, in seconds, between each ring splash
sound on the active line. For example, if a call comes into Line 1, and
then a call comes into Line 2 and you answer Line 2, Line 1 is
automatically placed on hold. While on the active Line 2, after 7
seconds, a ring splash audio sounds on the line reminding you that
the call on Line 1 is still on hold (determined by the "call hold
reminder timer" parameter), and then the ring splash is heard again
after 60 seconds (determined by this parameter).
Notes:
• You must enable the "call hold reminder" and/or "call hold
reminder during active calls" parameter(s), and the "call hold
reminder timer" parameter, for this parameter to work.
• A value of "0" prevents additional rings.
Integer
60
0-4294967295
call hold reminder frequency: 50
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the preferred line to switch focus to when incoming or
outgoing calls end on the phone.
Integer
1
0 (none - disables the preferred line focus feature)
1-2 (6863i)
1-24 (6865i/6867i/6869i/6873i)
preferred line: 2