Time Server Settings - Mitel 6867i Administrator's Manual

TIME SERVER SETTINGS

PARAMETER –
time server disabled
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
time server1
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
time server2
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the time server. This parameter affects the time
server1, time server2, and time server3 parameters. Setting this
parameter to 0 allows the use of the configured Time Server(s).
Setting this parameter to 1 prevents the use of the configured Time
Server(s).
Integer
0 (disabled)
0 (disabled)
1 (enabled)
time server disabled: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The primary time server's IP address or qualified domain name. If the
time server is enabled, the value for time server1 will be used to
request the time.
Note: For DHCP to automatically populate this parameter, your
DHCP server must support Option 42.
IP address or qualified domain name
1.mitel.pool.ntp.org
N/A
time server1: 192.168.0.5
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The secondary time server's IP address or qualified domain name. If
the time server is enabled, and the primary time server is not
configured or cannot be accessed the value for time server2 will be
used to request the time.
For DHCP to automatically populate this parameter, your DHCP
server must support Option 42.
IP address or qualified domain name
2.mitel.pool.ntp.org
N/A
time server2: 192.168.0.5
A-51