Mitel 6867i Administrator's Manual page 722

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
http port
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
https server
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
https path
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-24
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the HTTP port that the server uses to load the
configuration to the phone over HTTP.
Note: For DHCP to automatically populate this parameter, your
DHCP server must support Option 66.
Integer
80
1 through 65535
http port: 1025
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The HTTPS server's IP address. This will become effective after this
configuration file has been downloaded into the phone.
Optional: You can also assign an HTTPS relative path to the HTTPS
server. See the next parameter (https path).
Note: For DHCP to automatically populate this parameter, your
DHCP server must support Option 66.
IP address or Fully Qualified Domain Name
0.0.0.0
N/A
https server: 192.168.0.143
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The HTTPS path name to enter.
If the IP phone's configuration and firmware files are located in a
sub-directory beneath the server's HTTPS root directory, the relative
path to that sub-directory should be entered in this field.
dir/dir/dir
N/A
Up to 256 alphanumeric characters
https path: ipphones/6869i