Mitel 6867i Administrator's Manual page 476

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
In the Mitel Web UI, you use the following fields at Basic Settings -> Preferences to configure
park/pickup statically:
• Park Call
• Pick Up Parked Call
How it Displays on the Phone
On the phone UI, the static configuration method displays the following:
• When a call comes in and you pickup the handset, the default label of "Park" displays on
the first screen of the phone UI.
• After pressing the "Park" softkey to park the call, the default label of "Pickup" displays on
the first screen of the phone UI.
Note: A "Drop" softkey is also offered when the "Park" softkey is pressed. Pressing
the "Drop" softkey will cancel the park attempt and return the user to the original call.
The values you enter for the Park/Pickup feature are dependent on your type of server. The
following table provides the values you enter for the "sprecode" and "pickupsprecode"
parameters (configuration files), or "Park Call" and "Pickup Parked Call" fields (Mitel Web UI).
Park/Pickup Call Server Configuration Values
SERVER
Asterisk
Sylantro
BroadWorks
ININ PBX
**Leave "value" fields blank to disable the park and pickup feature.
Configuring Park/Pickup Static Configuration Using the Configuration Files
Use the following parameters to configure park/pickup static configuration:
• sprecode
• pickupsprecode
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
on .
page A-249
5-215
PARK VALUES**
70
*98
*68
callpark
PICKUP VALUES**
70
*99
*88
pickup
""