Mitel 6867i Administrator's Manual page 195

7. In the Check Expires checkbox, press the checkbox to enable the feature.
Enable/Disable HTTPS Validate Hostname:
8. In the Check Hostnames checkbox, press the checkbox to enable the feature.
9. Press the Save softkey.
10. Restart the phone for the selection to take affect.
MITEL WEB UI
1. Click on Advanced Settings->Network->HTTPS Settings.
HTTPS Validation
Certificate
Parameters
2. The "Validate Certificates" field is enabled by default. To disable validation of certificates,
click the check mark in the box to clear the check mark.
When this parameter is enabled, the HTTPS client performs validation on SSL certificates
before accepting them.
Notes:
1. This parameter is immediately applied after clicking the SAVE SETTINGS
button.
2. If you are using HTTPS as a configuration method, and use a self signed
certificate, you must disable (uncheck) this field before upgrading to Release
2.3 of the IP Phones.
3. The "Check Certificate Expiration" field is enabled by default. To disable validation of
certificate expiration, click the check mark in the box to clear the check mark.
When this parameter is enabled, the HTTPS client verifies whether or not a certificate has
expired prior to accepting the certificate.
Notes:
1. This parameter is immediately applied after clicking the SAVE SETTINGS
button.
2. If you are using HTTPS as a configuration method, and use a self signed
certificate, you must disable (uncheck) this field before upgrading to Release
2.3 of the IP Phones.
4. The "Check Certificate Hostnames" field is enabled by default. To disable validation of
hostnames, click the check mark in the box to clear the check mark.
Note: This parameter is immediately applied after clicking the SAVE SETTINGS
button.
Network Settings
4-42