Ring Tone Via Speaker During Active Calls Settings - Mitel 6867i Administrator's Manual

RING TONE VIA SPEAKER DURING ACTIVE CALLS SETTINGS

PARAMETER –
ring audibly enable
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
NO SERVICE CONGESTION TONE SETTINGS
PARAMETER –
no service congestion tone
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables/disables the feature whereby the ring tone of an incoming
call is played through the IP phone's speaker if a user is on an active
call.
Notes:
• Feature compatibility is dependent on the IP phone model (see
Ring Tone via Speaker During Active Calls
more information).
• This feature is not supported when utilizing the headset audio
mode.
• With this feature enabled and when the phone's speaker is
playing the incoming call's ring tone, call-waiting tones will not be
played.
Boolean
0 (disabled)
0-1
0 (disabled)
1 (enabled)
ring audibly enable: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
If enabled, the congestion tone will replace the conventional dial tone
when the handset is off hook, a headset is employed, or the
speakerphone is engaged. The congestion tone is played on a per
line basis whereby only the specific lines that are without service are
affected.
Boolean
0 (disabled)
0-1
0 (disabled)
1 (enabled)
no service congestion tone: 1
on page 5-125 for
A-175