Mitel 6867i Administrator's Manual page 173

CONFIGURATION SERVER DOWNLOAD PRECEDENCE
An Administrator can set the phone's download precedence to ignore DHCP, (only during the
boot when the remote configuration server is contacted) and use the following precedence
instead:
1. Configuration URI,
2. DHCP, and then
3. Direct configuration.
To configure the download precedence, you use the option value (-1) as the value for the "dhcp
config option override" parameter in the configuration files. Setting this parameter to "-1"
causes all DHCP configuration options to be ignored.
Configuring a Download Precedence Using the Configuration Files
Use the following procedure to configure the DHCP download precedence using the
configuration files.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"DHCP Option Settings"
Configuring a Download Precedence Using the IP Phone UI
Use the following procedure to configure a download precedence using the IP Phone UI.
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Network Settings.
4. Select DHCP Settings.
5. Select Download Options.
Note: Disabled (Ignores all DHCP configuration options (43, 66, 159, 160))
6. Select the Disabled option and press Enter.
Note: The "Disabled" download option performs the same function as the "-1" in
the configuration files (ignores DHCP options)
7. Restart the phone for the selection to take affect.
on page A-12.
Network Settings
4-20