Mitel 6867i Administrator's Manual page 903

PARAMETER –
sip intercom line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
INCOMING INTERCOM SETTINGS
PARAMETER –
sip allow auto answer
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip intercom mute mic
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the line for which the IP phone uses the configuration from,
when making the Intercom call. The IP phone uses the first available
line for physically making the call but uses the configuration from the
line you set for this parameter.
Note: The "sip intercom type" parameter must be set with the
Server-Side option to enable the "sip intercom line" parameter.
Integer
1
0-2 (6863i)
0-24 (6865i/6867i/6869i/6873i)
sip intercom line: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the IP phone to allow automatic answering for
an Intercom call. If auto-answer is enabled on the IP phone, the
phone plays a tone to alert the user before answering the intercom
call. If auto-answer is disabled, the phone treats the incoming
intercom call as a normal call.
Boolean
1 (true)
0 (false - do not allow auto-answer)
1 (true - allow auto-answer)
sip allow auto answer: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the microphone on the IP phone for Intercom
calls made by the originating caller.
Integer
1 (true)
0 (false - microphone is not muted)
1 (true - microphone is muted)
sip intercom mute mic: 1
A-205