Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
ACTION URI CONNECTED
A parameter called "action uri connected" (configuration files) and "Connected" (Mitel Web
UI) now allows XML scripts to determine when a call is connected. When enabled, the phone
triggers an HTTP GET when it goes into the "connected" state. This includes regular phone
calls, intercom calls, paging calls, RTP streaming, and the playing of a WAV file. It is also
triggered when the phone establishes the second leg of a 3-way call.
This parameter can use the following variables:
•
$$REMOTENUMBER$$
•
$$DISPLAYNAME$$
•
$$SIPUSERNAME$$
•
$$SIPAUTHNAME$$
•
$$INCOMINGNAME$
•
$$PROXYURL$$
•
$$LINESTATE$$
•
$$CALLDIRECTION$$
•
$$LOCALIP$$
•
$$DISPLAYNAME$$
•
$$CALLDURATION$$
•
$$REGISTRATIONSTATE$$
•
$$REGISTRATIONCODE$$
If the Administrator enables this feature (by specifying a connect URI), when a call is connected,
the phone checks to see if the event has a Connect URI configured. If the phones finds a
configured URI it executes an XML script or the variable if defined.
Example
In the configuration files, you can enter the following:
action uri connected: http://www.example.com/connect.php
An Administrator can enable the "Connected" Action URI feature using the configuration files
or the Mitel Web UI.
Limitations
•
During SLA calls, the phone uses the Action URI Connected parameter when the line is
seized before the caller dials out.
•
SCA and BLA calls on hold trigger the Action URI Connected parameter, since the retrieval
is a 2nd call by the phone, and the phone cannot link the retrieved call with the earlier held
call.
For more information about the XML API objects, see the XML Developers Guide.
5-293