Mitel 6867i Administrator's Manual page 584

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
FEATURE
Reject INV or BYE when Unsupported
Value in REQUIRE Header
XML URI for Key Press Simulation
Domain Name System (DNS) Server
Pre-caching Support
Configurable Transport Protocol for
SIP Services and RTCP Summary
Reports
Configurable Alphanumeric Input
Order for Username Prompts
Active Voice-over-IP (VoIP) Recording
BroadSoft Xsi Features
BroadSoft BroadWorks Executive and
Assistant Services
Visitor Desk Phone Support
6-6
DESCRIPTION
The IP Phones support a parameter that allows you to enable
or disable the rejection of an INV or BYE with a "420 Bad
Extension" if the INV or BYE contains an unsupported value in
the REQUIRE header.
The phones provide a feature that allow an XML Developer or
Administrator to define XML Key URIs that can send key press
events to the phone, just as if the physical hard key, softkey,
or programmable key were pressed on the phone.
This feature allows administrators to configure the phone to
download a text file which contains persistent DNS "A record"
hostname to IP address mappings. In addition, support for
persistent DNS "SRV records" has been added to permit SRV
based high availability of services.
The IP Phones support a parameter that allows administrators
to ability to configure the transport protocols used for SIP
services and RTCP summary reports.
This feature allow administrators the ability to change the
default behavior of the keypad input order during username
prompts from uppercase letters > digit > lower case letters to
digit > uppercase letters > lower case letters.
When using the IP phones with a Mitel call manager
supporting voice recording and a recording system with the
predefined subset of the SIP interface, administrators can
configure the phones to send duplicate copies of the transmit
and receive RTP or SRTP voice packets to the voice
recording system.
Interoperability support for the BroadSoft Xsi Speed Dial 8,
Call Log, and Hide Number services has been implemented.
When Speed Dial 8 functionality is configured on the
BroadSoft BroadWorks call manager and the phone is
configured for Xsi interoperability, users can simply place an
outgoing call to a speed dial number by pressing the Speed
Dial 8 key, selecting the desired number, and dialing out.
When Call Log functionality is configured on the BroadSoft
BroadWorks call manager and enabled on the phone, the
phone's native Received Callers List and Outgoing Redial List
are replaced with call information provided by the Xsi server.
When the Hide Number feature is enabled, users are able to
place anonymous calls whereby the user's caller ID will not be
displayed on the called party's phone.
The Executive and Assistant Services feature allows
Administrators to create an inter-network relationship
between Executives and Assistants allowing calls to the
Executive's phone to be screened, filtered, and routed to an
Assistant, whereby the Assistant can answer, divert, or push
the filtered call back to the Executive.
The Visitor Desk Phone feature allows users to log in to any
VDP-configured phone and thus use that respective phone as
his/her personal device for the duration of the logged in
session.