Password Settings - Mitel 6867i Administrator's Manual

OPTIONS 132 - TRANSFER VLAN ID ASSIGNMENT USING DHCP
PARAMETER –
dhcp option 132 vlan id
enabled
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

PASSWORD SETTINGS

PARAMETER –
admin password
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
user password
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables the phone to transport the VLAN ID parameter in the DHCP
protocol. When the phone receives the VLAN ID from the DHCP and
the value is different from the one used by the phone to trigger the
DHCP request, the phone reboots and then sends a new DHCP
request in the new VLAN. The phone will remember the VLAN ID
obtained by DHCP options so that on a reboot, the phone will send
a DHCP request using the correct VLAN.
Integer
1 (enabled)
0-1
0 (disabled)
1 (enabled)
dhcp option 132 vlan id enabled: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to set a new administrator password for the IP phone.
Note: The IP phones support numeric characters only in passwords.
If you enter a password with alpha characters, the phone uses the
default password instead.
Integer
22222
0-4294967295
admin password: 1234567890
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to set a new user password for the IP phone.
Note: The IP phones support numeric characters only in passwords.
If you enter a password with alpha characters, the phone uses the
default password instead.
Integer
Default value is an empty string "" (left blank)
0-4294967295
user password: 123
A-15