Mitel 6867i Administrator's Manual page 989

PARAMETER –
recording destinationN
(N is a number from 1 to 6)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
recording periodic beep
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies trusted IP addresses (maximum of six) corresponding to
the destination where the RTP/SRTP packets should be sent. The IP
phone will check to see if the destination IP addresses are trusted
before sending the duplicated RTP/SRTP packets.
Note: If all of these parameters are left undefined, no
authentication checks will be performed.
IP Address
N/A
N/A
recording destination1: 192.168.1.30
recording destination2: 192.168.1.31
recording destination3: 192.168.1.32
recording destination4: 192.168.1.33
recording destination5: 192.168.1.34
recording destination6: 192.168.1.35
CONFIGURATION FILES
startup.cfg, <mac>.cfg
Specifies how often (in seconds) the periodic beep tone (notifying
users that their call is being recorded) should be played.
Integer
15 (seconds)
0 (Disabled)
15
30
45
60
recording periodic beep: 30
Advanced Operational Parameters
A-291