Sip Basic, Per-Line Settings - Mitel 6867i Administrator's Manual

SIP BASIC, PER-LINE SETTINGS

The following parameters are SIP per-line settings. The value of "N" is 1 - 24 or 1-2 depending
on your model phone.
SIP PER-LINE AUTHENTICATION SETTINGS
PARAMETER –
sip lineN screen name
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip lineN screen name 2
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Used to display text on the screen of the phone. You may want to set
this parameter to display the phone user's name.
Text
N/A
Up to 20 alphanumeric characters
sip line1 screen name: Joe Smith
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Used to display text on a second line on the screen of the phone.
Notes:
• If other status messages display on the phone, such as "Network
Disconnected", the Screen Name 2 value does not display.
• Characters are allowed (such as "#").
• If the text is longer than the display width, than the display
truncates the text to fit the display.
Alphanumeric characters
N/A
Up to 20 alphanumeric characters
sip line1 screen name 2: Lab Phone
A-79