Mitel 6867i Administrator's Manual page 514

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
ENABLING/DISABLING MISSED CALLS INDICATOR
You can enable (turn on) and disable (turn off) the Missed Calls Indicator on the IP phones
using the following parameter in the configuration files:
• missed calls indicator disabled
Valid values for this parameter are 0 (enabled) and 1 (disabled). If this parameter is set to 0,
the indicator increments as unanswered calls come into the IP phone. If set to 1, the indicator
does not increment the unanswered calls.
Use the following procedures to enable/disable the Missed Calls Indicator on the IP phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files for enabling/disabling the Missed
Calls Indicator, see Appendix A, the section,
MISSED CALLS INDICATOR LINE APPLICABILITY
Administrators can also select the specific lines on the phone to which the missed calls indicator
is applicable. This can be performed by defining the "sip lineN missed calls enabled"
parameter in the configuration files ("0" for disabled, "1" for enabled) or through the Mitel Web UI.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Missed Calls Indicator Settings"
Configuring Missed Calls Indicator Applicability for Specific Lines Using the Mitel
Web UI
Use the following procedure to configure missed calls indicator applicability for specific lines
using the Web UI:
MITEL WEB UI
1. Click on Advanced Settings > LineN (where N = line number).
5-253
"Missed Calls Indicator Settings"
on .
page A-161
on .
page A-161