Mitel 6867i Administrator's Manual page 492

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
2. Press the programmed Call Forward key. The Call Forward Mode screen displays. Use
the 2 and 5 navigation keys to scroll through each state type.
Indicates
CFWD Enabled
Indicates
no CFWD
phone number
configured
Indicates
CFWD Disabled
In the above example, CFWD All is enabled as indicated by a check mark (
is enabled but no call forward phone number configured as indicated by a
No Answer is disabled, as indicated by an X.
3. Select a state for the account(s) in focus using the 2 and 5 navigation keys.
You can enable/disable any or all of the following states for an account:
• All: Forwards all incoming calls for the respective account to the specified number.
• Busy: Forwards incoming calls to a specified number if DND has been enabled for that
account OR if the account is currently engaged in another call.
• No Answer: Forwards incoming calls to a specified number if the call has not been
answered for the specified number of rings.
Note: If CFWD All, CFWD Busy, and CFWD No Answer are all enabled (and/or if
the account has DND enabled), the CFWD All settings take precedence over CFWD
Busy and CFWD No Answer.
You can also use the following keys if required:
• All Off: Disables all CFWD states for the current account in focus
• All On: Enables all CFWD states for the current account in focus
5-231
Cfwd Mode
1. All
Done Change
Cfwd Mode
2. Busy
Done Change
Cfwd Mode
3. No Answer
Done Change
Cfwd Mode
4. All Off
Done
!
Cfwd Mode
5. All On
Done
X
Change
Change

), CFWD Busy
!
, and CFWD