Mitel 6867i Administrator's Manual page 117

PARAMETER PARAMETER IN
IN MITEL WEB UI
IP PHONE UI
SIP Priority SIP Priority
RTP Priority RTP Priority
RTCP Priority RTCP Priority
PC PORT SETTINGS (PORT 1)
PC Port VLAN VLAN ID
ID
PC Port Priority Priority
PARAMETERS IN DESCRIPTION
CONFIGURATION
FILES
tos priority map This parameter is based on the Type of
Service (ToS), Differentiated Services
Code Point (DSCP) setting for SIP (tos sip
parameter), RTP (tos rtp parameter) and
RTCP (tos rtcp parameter). It is the
mapping between the DSCP value and the
VLAN priority value for SIP, RTP, and
RTCP packets.
You enter the tos priority map value as
follows:
(DSCP_1,Priority_1)(DSCP_2,Priority_2)..
...(DSCP_64,Priority_64)
where the DSCP value range is 0-63 and
the priority range is 0-7. Mappings not
enclosed in parentheses and separated
with a comma, or with values outside the
ranges, are ignored.
For more information, see Chapter 4,
"Virtual LAN (optional)"
vlan id port 1 Allows you to configure a VLAN ID that
associates with the physical Ethernet Port
1 (PC port).
For more information, see Chapter 4,
"Virtual LAN (optional)"
qos eth port 1 Specifies the priority value used for
priority passing VLAN packets through to a PC via
Port 1.
For more information, see Chapter 4,
"Virtual LAN (optional)"
Administrator Level Options
on page 4-43.
on page 4-43.
on page 4-43.
3-47