Mitel 6867i Administrator's Manual page 477

Configuring Park/Pickup Static Configuration Using the Mitel Web UI
MITEL WEB UI
1. Click on Basic Settings ->Preferences ->General
2. Enter a server value in the Park Call field to which incoming live calls will be parked.
Note: For values to enter in this field, see the table
Configuration Values"
3. Enter a server value in the Pick Up Parked Call field.
4. Click Save Settings to save your changes.
PARK/PICKUP PROGRAMMABLE CONFIGURATION (USING A SOFTKEY)
The programmable method of configuration creates park and pickup keys (softkeys,
programmable keys, expansion module keys) that you can configure on the IP phones.
For the 6867i, 6869i, and 6873i IP phones you can configure keys with park and pickup
functionality and then:
• specify a customized label to display on the Phone UI
• specify the state of the park and/or pickup keys (not applicable for MiCloud Telepo
interoperability)
For the 6863i and 6865i IP phones, you can configure programmable keys with park and pickup
functionality.
on .
page 5-215
Operational Features
"Park/Pickup Call Server
5-216