Mitel 6867i Administrator's Manual page 410

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
1. Click on Operation->Softkeys and XML
or
Click on Operation->Programmable Keys
or
Click on Operation->Expansion Module <N>.
Depending on your phone-model, the key configuration screen displays.
2. Select a key to configure.
For Softkeys and Expansion Module Keys:
3. In the "Type" field, select the type of softkey you want to configure.
Note: For available type values on each IP phone model, see Appendix A, the
section,
Parameters"
4. If applicable, enter a label in the "Label" field.
5. If applicable, in the "Value" field, enter a value to associate with the softkey. For example,
for a Speeddial value, you can enter a number you want to use for the Speeddial key, or
12345+ as a Speeddial prefix.
6. If applicable, in the "Line" field, select the line for which you want to associate the softkey.
7. Some softkey types allow you to configure specific operational states.
Operational states display to the IP phone when a softkey is used.
5-149
"Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key
on .
page A-217