Mitel 6867i Administrator's Manual page 735

LAN PORT (ETHERNET PORT 0) PARAMETERS
PARAMETER –
vlan id
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to configure a VLAN ID that associates with the physical
Ethernet Port 0 (LAN port).
• Setting the "vlan id" to 4095 and "vlan id port 1" to any ID from 1
to 4094 will allow frames from the PC port (containing a VLAN ID)
to be untagged before being forwarded to the LAN port and
frames from the LAN port (without a VLAN ID) to be tagged with
the configured VLAN ID before being forwarded to the PC port.
Example:
You enable tagging on the phone port as normal but set the "vlan
id" to 4095 and the "vlan id port 1" to any ID from 1 to 4094. The
following example sets the PC port to be on VLAN 3 but the LAN
port is configured as untagged:
tagging enabled: 1
vlan id: 4095
vlan id port 1: 3
• Alternatively setting the "vlan id" to any ID from 1 to 4094 and
"vlan id port 1" to 4095 will allow frames from the LAN port
(containing a VLAN ID) to be untagged before being forwarded to
the PC port and frames from the PC port (without a VLAN ID) to
be tagged with the configured VLAN ID before being forwarded to
the LAN port.
Integer
1
1 to 4095
vlan id: 300
A-37