Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
The following is a description of the information on the Status screen:
•
Network Status
•
Displays the network status of the Ethernet ports at the back of the phone. You can
also view the phone's IP and MAC addresses. Information in this field includes Link
State, Negotiation, Speed, and Duplex for Port 0 and Port 1.
•
Hardware Information
•
Displays the current IP phone platform and the revision number.
•
Firmware Information
•
Displays information about the firmware that is currently installed on the IP phone (and
K680i Keyboard if applicable). Information in this field includes Firmware Version, Firm-
ware Release Code, Boot Version, Release Date/Time.
•
SIP Status
•
Displays information about the SIP registration status of the phone. If there are accounts
configured on the IP Phone, their SIP status displays in this field. Excluding the 6863i
(2 lines), all model phones display the status of up to 24 lines.
The following table describes the status conditions that can display for an account(s).
STATUS CONDITION DESCRIPTION
Registered
SIP Error Number
3-12
Displays this status on accounts that HAVE been registered with the SIP proxy
server.
Example:
Line
SIP Account
1
650@proxy.com:5060
where
Account Number is "1"
SIP Account is "650@proxy.com" on port "5060"
Status is "Registered"
Backup registrar is used ("Yes")
Displays on accounts when registration fails with the SIP proxy server.
Example:
Line
SIP Account
4
653@proxy.com:5060
where
Account Number is "4"
SIP Account is "653@proxy.com" on port "5060"
Status is "401" - Unregistered if SIP registration fails.
Backup registrar is used ("No")
Backup
Registrar
Status
Used?
Registered
Yes
Backup
Registrar
Status
Used?
401
No