Mitel 6867i Administrator's Manual page 982

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
ROUTE HEADER IN SIP PACKET
PARAMETER –
sip remove route
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
COMPACT SIP HEADER
PARAMETER –
sip compact headers
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
REJECTION OF INV OR BYE
PARAMETER –
sip enforce require hdr
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-284
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables and disables the addition of the Route header in a SIP
packet. Enable this parameter for outbound proxies that do not
support Route headers.
Note: When enabled this will break all support for SIP routing, so if
some other device in the network attempts to add itself to the route
it will fail.
Boolean
0
0 (disable - adds the Route header to the packet)
1 (enable - removes the Route header from the packet)
sip remove route: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the IP phones to use compact SIP headers in
the SIP packets sent from the phone.
Boolean
0 (disabled- uses long SIP header format)
0 (disabled- uses long SIP header format)
1 (enabled- uses short (compact) SIP header format)
sip compact headers: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables and disables the rejection of an INV or BYE with a "420 Bad
Extension" if the INV or BYE contains an unsupported value in the
REQUIRE header.
Integer
0
0 (disable)
1 (enable)
sip enforce require hdr: 1